Mild Steel & Structural Steels

These are rectangular shaped or flat bars produced in rolling mills with the rolls groove set and maintained in such a manner that the resultant product is rectangular in shape. These are available in various types of steels having differing end uses. These Hot Rolled Bars do not have a very good or smooth surface finish. These are meant for general purpose uses like fabrication, support structures in non critical uses, general machining purposes, etc.

For some applications the bars are required to have a bright, smooth and uniform surface. To achieve this it is cold drawn and the bars are known as Steel Bright Bars or Bright Steel Bars and find extensive use in light machining, fabrication (windows / frames / grilles / gates) and aesthetic applications. Special sizes and non standard sizes in smaller quantities compared to Hot Rolled Bars can also be produced.

{supertable}

Size	Grade	Condition
20 X 3/5 MM, 25 X 3/5/6 MM, 32 X 5/6/10/12 MM, 40 X 4/5/6/8/10/12 MM, 50 X 5/6/8/10/12/16 MM, 65 X 5/6/8/10/12/16 MM, 75 X 5/6/8/10/12/16/20/25 MM, 100 X 6/8/10/12/16/20/25 MM, 125 X 6/8/10/12/16/20/25 MM, 150 X 6/8/10/12/16/20/25 MM, 200 X 6/8/10/12/16/20/25 MM, 250 X 6/8/10/12/16/20/25 MM, 300 X 6/8/10/12/16/20/25 MM Any other size can also be made against specific order	MS, IS:2062 Gr A/B/C, St37-2, St52-3, SAE1018	Hot Rolled / Pickled & Oiled / Bright

{/supertable}

Details

Written by: Super User

CR steel sheets have good malleability, ductility and ability to deform; with good flatness and excellent surface, are available with different thickness and width combinations; are mainly used to manufacture the high value-added products in automotive and appliance, beverage packaging, electronic, electrcial moor and building etc.

{supertable}

Product	Thickness	Width	Length	Grades	Application
CR Coils	0.27, 0.30, 0.35, 0.40, 0.45, 0.5, 0.55, 0.58, 0.6, 0.63, 0.7, 0.8, 0.9, 1, 1.2, 1.25,1.50, 1.60, 1.85, 2	900 to 1580MM		IS 513/1994 (O, D, DD & EDD), IRSM 41, SAILCOR, Copper Bearing, HSCR - 26/35, ASTM A 568/366, BS-1449-Pt-1, JIS G 3141 SPCC/CD, DIN-1623 St 12.3, Drawing, Deep Drawing, Extra Deep Drawing, SAE1006, SAE1008, SAE1010
CR Sheet	0.60, 0.63, 0.70, 0.80, 0.90, 1.00, 1.25, 1.50, 1.60, 1.85, 2.00	900 to 1500MM	1815 to 3600MM	IS 513/1994 (O, D, DD & EDD), IRSM 41, SAILCOR, Copper Bearing, HSCR - 26/35, ASTM A 568/366, BS-1449-Pt-1, JIS G 3141 SPCC/CD, DIN-1623 St 12.3, Drawing, Deep Drawing, Extra Deep Drawing, SAE1006, SAE1008, SAE1010

{/supertable}

Details

Written by: Super User