IS:2062 E250 Hot Rolled Bars / Black Bars - Delivery Conditions
| Section | Round |
| Size Range | 16mm to 200mm |
| Condition | Hot Rolled |
| Tolerance offered | As per IS:2062 |
| Standard | Hot Rolled Bars to generally conform to IS:2062 |
| Straightness | As per IS:1852 where applicable |
| Ovality | Not specifically controlled, but within tolerance limits |
| Lengths offered | In full lengths up to 12000 mm / 40ft. With prior agreement, fixed/custom lengths can also be offered. |
| Straightened | No, as rolled condition. |
| Polished | No |
| End Cut Condition | Generally supplied with as-rolled ends. Special end cuts or deburred ends can be offered upon request. |
| Colour Coding | Both ends are colour coded for easy identification. Buyer's colours can also be applied. |
| Rust Preventive | Hot Rolled Bars can be supplied with rust preventive coating upon request |
| Packing | Loose or Bundled with tie strings or wire and/or packed in chosen packing material |
| Test Report | Test Certificates for Chemical, Mechanical, and Physical properties as per agreement |
| Typical Mechanical Properties |
|
| Chemical Composition |
|
| Applications | IS:2062 E250 is widely used in structural applications, general engineering, and fabrication jobs such as making frames, beams, and other load-bearing components. |
| Melting & Refining Method | IS:2062 E250 is generally produced using Basic Oxygen Furnace (BOF) or Electric Arc Furnace (EAF) methods, with secondary refining like Ladle Refining Furnace (LRF) to maintain consistent quality. |
| Rolling Route | The material is produced via the Continuous Casting route, where molten steel is cast into billets and then hot rolled into desired bar sizes. |
| Quality Control | Strict quality control processes are implemented, including chemical analysis, mechanical testing, and dimensional checks to ensure product quality. |
| Surface Condition | Hot Rolled Bars may have a scale-covered surface, which can be removed through pickling, shot blasting, or machining as per customer requirements. |
| Traceability | Each batch is fully traceable back to its heat number, ensuring documentation of all chemical and mechanical properties. |
